Makita Ga7011c: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Makita GA7011C Information

The Makita GA7011C is a 7-inch angle grinder that is powered by a 15-amp motor. It has a no-load speed of 6,000 RPM and a spindle bore of 5/8-11 UNC. The grinder is equipped with a soft start feature, a constant speed control, and an electronic current limiter. It also has a tool-less wheel guard and a side handle.

Image of Makita GA7011C angle grinder

Specifications

  • Motor: 15 amps
  • No-load speed: 6,000 RPM
  • Spindle bore: 5/8-11 UNC
  • Wheel diameter: 7 inches
  • Weight: 7.5 pounds

Features

  • Soft start feature for smooth starts
  • Constant speed control for consistent performance under load
  • Electronic current limiter protects the motor from overload
  • Tool-less wheel guard for quick and easy adjustments
  • Side handle for added comfort and control

What's in the box

  • Makita GA7011C angle grinder
  • 7-inch abrasive disc
  • Wheel guard
  • Side handle
  • Hex wrench
  • Instruction manual

The Makita GA7011C is a powerful and versatile angle grinder that is ideal for a variety of applications, including cutting, grinding, and polishing. It is a well-made tool that is backed by a 3-year warranty.

Here is a table of the specifications for the Makita GA7011C:

FeatureSpecification
Motor15 amps
No-load speed6,000 RPM
Spindle bore5/8-11 UNC
Wheel diameter7 inches
Weight7.5 pounds
Soft start featureYes
Constant speed controlYes
Electronic current limiterYes
Tool-less wheel guardYes
Side handleYes

The Makita GA7011C is a great choice for anyone who needs a powerful and versatile angle grinder. It is well-made and backed by a 3-year warranty. If you are looking for an angle grinder that can handle a variety of tasks, the Makita GA7011C is a great option.

Makita GA7011C Compare with Similar Item

a table comparing the Makita GA7011C with similar items:

FeatureMakita GA7011CMakita GA7021Makita XAG04Z
Motor15 A15 A12 A
No-load speed6,000 RPM6,000 RPM8,500 RPM
Voltage120 V120 V18 V
Weight7.5 lbs7.5 lbs3.8 lbs
FeaturesSoft-start, electronic speed control, tool-less wheel guard adjustmentSoft-start, electronic speed control, AC/DC switch, tool-less wheel guard adjustmentBrushless motor, electronic speed control, dust collection shroud
Price$269$279$299

As you can see, the Makita GA7011C is a mid-range angle grinder with a 15 A motor and a no-load speed of 6,000 RPM. It has soft-start, electronic speed control, and tool-less wheel guard adjustment. It is priced at $269.

The Makita GA7021 is a similar model with the same motor and no-load speed, but it also has an AC/DC switch. This means that it can be used with both AC and DC power sources. It is priced at $279.

The Makita XAG04Z is a cordless angle grinder with a 12 A motor and a no-load speed of 8,500 RPM. It is brushless, which means that it is more efficient and has a longer lifespan. It also has electronic speed control and a dust collection shroud. It is priced at $299.

So, which angle grinder is right for you? If you need a powerful and versatile grinder that can be used with both AC and DC power sources, then the Makita GA7021 is a good option. If you are looking for a cordless grinder with a long lifespan and a dust collection shroud, then the Makita XAG04Z is a great choice. And if you are looking for a more affordable option, then the Makita GA7011C is a good value.

Makita GA7011C Pros/Cons and My Thought

The Makita GA7011C is a 7-inch angle grinder that is well-liked by users for its power, durability, and versatility. It has a powerful 10 amp motor that can handle even the most demanding grinding tasks. The grinder is also equipped with a durable die-cast aluminum housing that protects it from damage.

Here are some of the pros and cons of the Makita GA7011C:

Pros:

  • Powerful 10 amp motor
  • Durable die-cast aluminum housing
  • Variable speed control
  • Soft start feature
  • Dust collection port
  • Ergonomic design

Cons:

  • Can be a bit heavy
  • No quick-release wheel guard

Here are some user reviews of the Makita GA7011C:

Positive reviews:

  • "This is a great grinder! It's powerful, durable, and easy to use."
  • "I've been using this grinder for years and it's still going strong. It's a great value for the price."
  • "This grinder is perfect for my needs. It's powerful enough to handle even the toughest grinding tasks, but it's still easy to control."

Negative reviews:

  • "It's a bit heavy, but that's to be expected with a grinder this powerful."
  • "I wish it had a quick-release wheel guard."

Overall, the Makita GA7011C is a great angle grinder that is well-liked by users. It is powerful, durable, and versatile. However, it is a bit heavy and does not have a quick-release wheel guard.

Here are my thoughts on the Makita GA7011C:

I think the Makita GA7011C is a great angle grinder for the price. It is powerful, durable, and versatile. However, it is a bit heavy and does not have a quick-release wheel guard. If you are looking for a powerful and durable angle grinder, I would recommend the Makita GA7011C. However, if you are looking for a lightweight grinder with a quick-release wheel guard, you may want to consider another model.

Makita GA7011C Where To Buy

some places where you can buy the Makita GA7011C and spare parts:

  • Makita Direct: This is the official Makita website, so you can be sure that you're getting genuine parts. They also offer a variety of other power tools and accessories. Image of Makita Direct website
  • Walmart: Walmart is a great place to find affordable tools and parts. They often have sales and discounts, so you can save money. Image of Walmart website
  • Amazon: Amazon is another great place to find tools and parts. They have a wide selection of products and competitive prices. Image of Amazon website
  • Best Buy: Best Buy is a good option if you're looking for a brick-and-mortar store to buy your tools and parts. They have a knowledgeable staff who can help you find what you need. Image of Best Buy website
  • Lowes: Lowes is another good option for brick-and-mortar stores. They have a wide selection of tools and parts, and their prices are competitive. Image of Lowes website
  • eBay: eBay is a good place to find used tools and parts. You can often find great deals on eBay, but be sure to do your research to make sure that you're getting a genuine part. Image of eBay website

I hope this helps!

Makita GA7011C Problems and Solutions

some common issues and solutions for the Makita GA7011C angle grinder, as described by experts:

Issue: The grinder is not turning on. Solution:

  1. Make sure that the grinder is plugged in properly.
  2. Check the power switch to make sure that it is turned on.
  3. If the grinder is still not turning on, check the fuse. If the fuse is blown, replace it with a new one.

Issue: The grinder is not spinning at full speed. Solution:

  1. Check the carbon brushes to make sure that they are not worn out. If the carbon brushes are worn out, replace them with new ones.
  2. Check the air filter to make sure that it is clean. If the air filter is dirty, clean it or replace it.
  3. Check the motor to make sure that it is not damaged. If the motor is damaged, it will need to be replaced.

Issue: The grinder is overheating. Solution:

  1. Allow the grinder to cool down before using it again.
  2. Check the ventilation ports to make sure that they are not blocked.
  3. Use the grinder in a well-ventilated area.
  4. If the grinder is still overheating, it may need to be serviced by a qualified technician.

Issue: The grinder is making a strange noise. Solution:

  1. Stop using the grinder and check for any loose or damaged parts.
  2. If you can't find any loose or damaged parts, the grinder may need to be serviced by a qualified technician.

I hope this helps!

Makita GA7011C Manual

Safety Information

  • Read and understand all safety instructions before using this tool.
  • Keep this manual for future reference.
  • Do not use this tool if it is damaged or malfunctioning.
  • Use only the accessories and replacement parts specified by Makita.
  • Wear safety glasses and other personal protective equipment when using this tool.
  • Keep hands and body away from the rotating wheel.
  • Do not use this tool in wet or damp locations.
  • Do not use this tool for any purpose other than that for which it was intended.

Before Use

  • Inspect the tool before each use.
  • Make sure that the guard is in place and in good working order.
  • Check the wheel for cracks or other damage.
  • Do not use the tool if the guard or wheel is damaged.
  • Tighten the wheel nut to the specified torque.
  • Use the correct type and size of wheel for the application.

Troubleshooting

  • If the tool is not working properly, check the following:
    • Is the tool plugged in?
    • Is the switch turned on?
    • Is the wheel properly tightened?
    • Is the wheel damaged?
  • If you are still having problems, contact Makita for assistance.

Maintenance

  • Keep the tool clean and free of debris.
  • Inspect the tool regularly for wear or damage.
  • Replace worn or damaged parts immediately.
  • Do not use the tool if it is damaged.

Warranty

This tool is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the tool fails within the warranty period, Makita will repair or replace it, at its option.

Contact Information

Makita USA 1351 South 7th Street Anaheim, CA 92805 Phone: 1-800-462-5686 Website: www.makitatools.com

Additional Information

  • For more information on the Makita GA7011C, please refer to the owner's manual.
  • You can also find additional information on the Makita website.

Thank you for choosing Makita.

Comments

Post a Comment

Popular posts from this blog

Einhell Tc-mc 355: Pros And Cons, Common Issues, And Best Places To Purchase

Image
Einhell TC-MC 355 Information The Einhell TC-MC 355 is a powerful metal cutting saw that is ideal for a variety of tasks, including trimming, cutting to size, and cutting through metal in various thicknesses. It has a 2300-watt motor that provides plenty of power for even the most demanding jobs, and a cutting speed of 4000 rpm ensures that you can get the job done quickly and efficiently. The TC-MC 355 features a soft-start function that helps to protect the mechanical system against high torque, and an adjustable height stop that allows you to precisely set the cutting height. The blade lock ensures that the blade can be changed safely, and the clamping mechanism with quick-release lock allows you to make angle cuts of -15 degrees to 45 degrees. A spark deflector protects the surrounding area from glowing sparks. The Einhell TC-MC 355 comes with a tool holder for the supplied hex wrench, plus a transport brace and additional handle for transport. It is a versatile and powerful metal
Read more

The Complete Guide To Ferm Msm1035: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Image
Ferm MSM1035 Information The Ferm MSM1035 is a powerful and versatile radial arm saw that is perfect for a variety of woodworking projects. It features a 1500-watt motor that provides plenty of power for cutting through even the toughest materials, and a 210mm TCT saw blade that ensures clean, precise cuts. The saw also has a sliding function that allows you to cut wider boards, and a laser guide that helps you to make accurate cuts. Here is an overview of the Ferm MSM1035: Introduction: The Ferm MSM1035 is a radial arm saw that is perfect for a variety of woodworking projects. It features a powerful 1500-watt motor, a 210mm TCT saw blade, and a sliding function that allows you to cut wider boards. The saw also has a laser guide that helps you to make accurate cuts. Specifications: Motor: 1500 watts Saw blade: 210mm TCT Cutting depth: 60mm Cutting width: 310mm (with sliding function) Laser guide Dust collection port Weight: 12.4kg Features: Powerful 1500-watt motor for cutting through
Read more